Thirty years to lead the industry, to create brilliant future. New era Struggling to write a new chapter in bearing strong country
Thirty years to lead the industry, to create brilliant future. New era Struggling to write a new chapter in bearing strong country - 2018 International Bearing Summit held in Shanghai
Source: Wen / Ai Jingfang Bearing Industry Editorial Department
The golden autumn is cool, and the osmanthus fragrance is fragrant. On September 18, 2018, the "2018 International Bearing Summit" co-sponsored by China Bearing Industry Association, State Key Laboratory of Aviation Precision Bearings, National Large Bearing Engineering Technology Research Center, and National Joint Laboratory of High-end Bearing Tribology Technology and Application (hereinafter referred to as the summit) was held in Shanghai. More than 300 representatives from domestic and foreign bearings and related industries attended the meeting.
Get together, make suggestions, and take the pulse bearing industry to seek common development in the industry.
The conference was chaired by He Jiaqun and Lu Gang, senior consultants of the China Axis Association.
At 8:30 in the morning, the conference was grandly opened. Zhou Yu, executive vice president and secretary general of China Bearing Industry Association, delivered a speech on behalf of the organizers. He extended a warm welcome to the leaders and guests of the conference, and cared for, cared for and supported the bearing industry for a long time. The friends from all walks of life expressed their heartfelt thanks. Bearing Summit since 2008,It is held every two years and has been successfully held for five times. It is the highest level, largest scale, most extensive participation and most abundant event in the international bearing industry. This year marks the 10th anniversary of the establishment of the Shanghai International Bearing Summit. It is the highest level, largest scale, most extensive participation and most abundant event in the international bearing industry. This summit coincides with the 40th anniversary of China's reform and opening up, which coincides with the establishment of the China Bearing Industry Association. The anniversary, at an important time point, shoulders an important mission, is an important meeting in which the bearing industry is heading into a new era and striding forward to a new journey.
Zhou Yu pointed out that China's economy has shifted from a high-speed growth phase to a high-quality development phase. The current economic operation has changed steadily and has faced some new problems and new challenges. Our bearing industry must adhere to the general tone of steady progress, always implement new development concepts, implement high-quality development requirements, take supply-side reform as the main line, accelerate the pace of reform and opening up, and focus on solving imbalances and inadequacies in the development of the industry. The problem is to achieve quality growth. Make a difference in the country's strategy of revitalizing the real economy and make due contributions to the process of becoming a world-leading powerhouse!
Chen Bin, Executive Vice President of China Machinery Industry Federation, made a keynote report on "Analysis of Economic Operation Situation of Machinery Industry in 2018". Based on detailed data, it analyzed the steady development of China's machinery industry and the overall stable development trend, pointing out China's machinery. Problems that exist in industry and are in urgent need of attention. Chen Bin emphasized that as a bearing enterprise, it is necessary to pay close attention to the impact of the development trend of the mainframe industry on the bearing industry, to look up and stay in danger, to adjust the product structure and market structure in time, and to enhance the ability to respond to market fluctuations.
Dong Yang, executive vice president and secretary general of China Association of Automobile Manufacturers, pointed out that China is already the world's number one automobile manufacturing country and is moving towards a car manufacturing powerhouse. The automobile industry is leaping into a bearing. The development of the industry has created a broad market space. The bearing industry should pay great attention to the technical research and development of traditional automotive supporting bearings, and strive to improve the accuracy, performance, life and reliability of automotive bearings. In particular, efforts should be made to reduce the weight, integration, low friction torque and extended maintenance-free cycles of the bearings. China's electric vehicles have the fastest growth rate and possession in the world. New energy vehicles have subverted the traditional structure, reducing the amount of bearings used and technical requirements. For the bearing industry, opportunities and challenges coexist. We must plan ahead and make forward-looking Technology and market layout, seize the opportunities in emerging markets, and strive to catch up and seize the opportunities.
Zhang Liqun, a researcher at the Macroeconomic Research Department of the Development Research Center of the State Council, delivered a keynote speech entitled "Accelerating the Transition to High-Quality Development - Analysis of the Current Macroeconomic Situation and Policy Orientation". His forward-looking perspectives include investment, consumption, and export. It is analyzed that the effect of China's steady growth policy has begun to appear. China's economic growth rate has basically been completed and entered the new normal. It is proposed that the bearing industry should vigorously promote reform and development, intelligent development, high-end development, development, green development, service development and agglomeration. High quality development such as development and collaborative development.
Duan Chongbo, Deputy Director of the Foreign Trade Department of the Ministry of Commerce, in the report entitled "Current Foreign Trade Situation and Policy", deeply interpret the current foreign trade situation and policies, and enhance everyone's confidence in expanding opening up, developing exports, and deep integration of the international economy. We feel the confidence and confidence of China in dealing with the Sino-US trade war. It also makes the Chinese bearing industry at the cusp of the turmoil understand that we must work hard, and with sufficient wisdom to lay out short-term, medium-term and long-term strategies, and gradually realize China's bearings. The industry is irreplaceable in the international and domestic markets.
Hong Siguo, Executive Vice President and Secretary-General of China Agricultural Machinery Industry Association, shared with the participants the "Thinking about the Transformation and Development of China's Agricultural Machinery Industry", elaborated on the status quo of China's use as a major agricultural machinery country, and objectively analyzed the problems faced by China's agricultural machinery industry. Challenges, combined with the actual implementation of specific measures to promote the development of agricultural machinery quality. The annual sales of agricultural machinery in China is nearly 500 billion yuan, and the annual sales of supporting bearings are nearly 4 billion yuan. As the key basic parts of agricultural machinery, the bearings are divided into 40 categories and more than 3,500 kinds, covering almost all types of bearings. In order to adapt to the country's comprehensive mechanization and full mechanization requirements for agriculture, the types of agricultural machinery in China will increase exponentially. At the same time, agricultural machinery should develop in the direction of large-scale, high-end, high-power, high-efficiency, multi-functional, precise and intelligent, and environmentally friendly. . This aspect has created a lot of space for the development and application of domestic bearings. On the other hand, it also puts forward higher requirements on the accuracy, performance, life and reliability of supporting bearings. China's bearing enterprises should increase the research and development of agricultural machinery bearings. , continuously improve the design and manufacturing level of agricultural machinery bearings.
In the "experience exchange" session in the afternoon, Meng Wei, chairman and party secretary of Wafangdian Bearing Group Co., Ltd., executive director of Japan Seiko Co., Ltd., president of China, general manager of NSK Investment Co., Ltd., Hongchang, Luoyang Bearing Wang Jinghua, Chairman of the Research Institute Co., Ltd., Yu Qingfeng, Senior Director of Industrial R&D and Sales Management of Schaeffler Trade (Shanghai) Limited Formula, Zhang Yajun, Secretary General of Zhejiang Bearing Industry Association and Chairman of Hangzhou Bearing Test Research Center, respectively In the process of reform and innovation, explore the road of high-quality development, "Working together, mobilizing the future, NSK, helping China to make", "The future of China's bearing industry, innovation and development", "Innovation drives the future", "Playing the role of bridges and ties, promoting industrial transformation and upgrading" The five business leaders have shared their experiences in light of their own actual and developmental situation. These speeches are "seeking the truth".
Provide a lot of theoretical basis and market information for the industry.
In the afternoon conference, an important part was the commendation of “Excellent Suppliers in the National Bearing Industry”. Lu Gang, Senior Consultant of China Axis Association, read the "Decision on Recognition of "Excellent Suppliers in the National Bearing Industry" jointly issued by China Bearing Industry Association, China Automobile Industry Association, China General Machinery Industry Association and China Machine Tool Industry Association. The conference commended 23 "excellent suppliers of automotive special bearings", 9 "excellent suppliers of general-purpose reducer bearings", and 16 "excellent suppliers of special-purpose machine tools (equipment)" (listed attached), and held a grand award. ceremony. Xue Yiping, Executive Vice President of China Machinery Industry Federation, Jing Xiaobo, former inspector of the Economic Operation Bureau of the Ministry of Industry and Information Technology, Zhou Yu, Executive Vice President and Secretary General of China Axis Association, Huang Wei, Chairman of China General Machinery Industry Association, China Machine Tool Industry Association The director of the marketing department, Tu Jingxian, and the rotating chairman and vice chairman of the China Axis Association, and other leading guests presented awards to the winners and took a group photo. The selection of "National Excellent Suppliers in the Bearing Industry" is to ensure and maintain the performance of the mainframe, the interests of the users, guide the high-quality production of the bearing manufacturing enterprises, and purify the market order, and further promote the coordination of the bearing industry in China to the high-end host. development of.
In 2018, it was the 30th birthday of China Bearing Industry Association. In order to make the celebration simple and solemn, the China Axis Association arranged a celebration and the International Bearing Summit was held. One highlight of this summit is the "High-end Bearing Technology Roadmap" and the "China Bearing Industry History (2005-2017)" debut.
Zhang Yanmin, executive vice president of China Mechanical Engineering Society, delivered a speech for the "High-end Bearing Technology Roadmap" and jointly unveiled the launching ceremony with Secretary Zhou Yu. "High-end Bearing Technology Roadmap" as one of the series of mechanical engineering technology roadmaps in China, the China Bearing Industry Association organizes experts in the industry to deeply study the development status, objectives, tasks, problems and challenges of high-end bearings in China, and draws high-end bearings for China in 2030. Technical development roadmap, proposed 7 key common technologies that must be broken through bearing innovation design technology, bearing precision forming processing technology, material and heat treatment technology, surface integrity manufacturing technology, bearing testing technology, bearing life evaluation technology, lubrication technology, etc. . The research and preparation of "High-end Bearing Technology Roadmap" clarified the technical ideas of China's high-end bearing development, and provided guidance for leading the industry to implement a series of strategic decisions of "innovation drive", "transformation and upgrading" and "building a bearing strong country". Government departments provide scientific advice for decision-making, and also provide a basis for the industry to seek government and social support.
Secretary-General Zhou Yu gave a speech at the "China Bearing Industry History (2005-2017)" and jointly unveiled the launching ceremony with Xue Yiping, executive vice president of the China Machinery Industry Federation. "China Bearing Industry History (2005-2017)" condenses the efforts of leaders of China Bearing Industry Association, industry experts and related business leaders. It is the crystallization of collective wisdom. By reviewing history and smashing the future, we will inspire 400,000 bearing practitioners to realize The bearing industry is strong in the struggle of the country.
In order to enrich the content of the summit and enhance the effect of information dissemination, the China Axis Association Secretariat printed and published the "2018 Shanghai International Summit Proceedings", collecting 36 papers, nearly 340,000 words. The content covers economic situation, industrial policy, industry development, innovation drive, intelligent manufacturing, bearing technology, experience exchange and many other aspects.
Zhou Yu, executive vice president and secretary general of the China Axis Association, made an important summary speech. Zhou Yu said that this summit is an important meeting to promote China's bearing industry under the guidance of Xi Jinping's new era of socialism with Chinese characteristics. It will take the lead in a new era and embark on a new journey. It will guide the whole industry to consciously talk about the industry. The development of the enterprise is placed in the new era of socialism with Chinese characteristics and the national national great cause. It is placed in two hundred-year goals to lay out, not forgetting the initial heart, keeping in mind the mission, enhancing the sense of urgency, mission and responsibility, climbing the slopes, Go forward and work hard to achieve the dream of a world-leading country!